{"title":"O-Flute End Mills for Plastics \u0026 Soft Aluminum","description":"\u003cp\u003e\n\u003cstrong\u003eO-flute end mills\u003c\/strong\u003e are designed for cutting \u003cstrong\u003eplastics, acrylic, HDPE, polycarbonate, soft aluminum, and other suitable non-ferrous materials\u003c\/strong\u003e. Their open flute geometry provides room for efficient chip evacuation, helping reduce heat buildup, chip recutting, chip welding, and material melting in softer materials.\n\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e plastics, acrylic, HDPE, polycarbonate, soft aluminum, and other suitable non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWhy choose it:\u003c\/strong\u003e The single O-flute design provides large flute clearance for smooth chip flow, which is especially helpful in plastics and softer materials that can melt, gum up, or reweld if chips are not cleared properly\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCut direction:\u003c\/strong\u003e Up-cut O-flutes help pull chips up and away from the cut and can improve bottom-edge cut quality. Down-cut O-flutes can help improve top-edge finish, but require good chip clearing because they push chips downward into the cut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating options:\u003c\/strong\u003e Available in uncoated, titanium nitride coated, and other supplier-described coated options. For many plastics, an uncoated or polished O-flute is often preferred for clean chip flow. TiN-coated O-flutes may be useful for soft aluminum and other appropriate non-ferrous materials where added wear resistance is helpful\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCommon uses:\u003c\/strong\u003e Cutting, slotting, profiling, trimming, and routing plastics where chip evacuation, edge finish, and heat control matter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\u003ca style=\"color:#0066cc; font-weight:bold; text-decoration:underline;\" href=\"\/pages\/choosing-single-o-flute-for-plastics\"\u003e\nSingle-Flute vs O-Flute — choosing the right option for plastics and soft materials →\n\u003c\/a\u003e\n\u003c\/p\u003e\n\n\u003cp\u003e\n\u003ca style=\"color:#0066cc; font-weight:bold; text-decoration:underline;\" href=\"https:\/\/drillbitsunlimited.com\/pages\/how-to-choose-between-up-cut-and-down-cut-tools\"\u003e\nUp-Cut vs Down-Cut — cutting direction explained →\n\u003c\/a\u003e\n\u003c\/p\u003e\n\n\u003cp\u003e\n\u003cstrong\u003eUse the filters below\u003c\/strong\u003e to narrow results by diameter, flute geometry, end type, coating, and cut direction to find the exact tool you need.\n\u003c\/p\u003e","products":[{"product_id":"1-8-upcut-o-flute-end-mill-aluminum-plastic","title":"0.1250\" (1\/8\") Up-Cut O-Flute Solid Carbide End Mill – 1\/8\" Shank, Aluminum \u0026 Plastic MO-180","description":"\u003cp\u003e\u003cstrong\u003e0.1250\" (1\/8\") x .500\" LOC Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003e1\/8\" up-cut single O-flute carbide end mill\u003c\/strong\u003e features a \u003cstrong\u003e0.1250\" (1\/8\") cutting diameter\u003c\/strong\u003e, \u003cstrong\u003e.500\" length of cut\u003c\/strong\u003e, \u003cstrong\u003e1.50\" overall length\u003c\/strong\u003e, and a standard \u003cstrong\u003e1\/8\" shank\u003c\/strong\u003e. It is designed for CNC routing, profiling, slotting, and trimming in plastics and suitable non-ferrous materials.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003esingle O-flute geometry\u003c\/strong\u003e is especially well suited for cutting \u003cstrong\u003eacrylic, plastic, PVC, ABS, HDPE, polycarbonate, and other softer materials\u003c\/strong\u003e. It may also be used in \u003cstrong\u003ealuminum and suitable non-ferrous materials\u003c\/strong\u003e when proper feeds, speeds, chip clearing, and workholding are used.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eup-cut design\u003c\/strong\u003e helps evacuate chips efficiently by pulling chips up and away from the cut. This can improve \u003cstrong\u003ebottom-edge cut quality\u003c\/strong\u003e in many routing applications. Because up-cut tools pull upward, the top edge may require proper hold-down, masking, or finishing depending on the material.\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic and plastic machining\u003c\/li\u003e\n  \u003cli\u003ePVC, ABS, HDPE, and polycarbonate cutting\u003c\/li\u003e\n  \u003cli\u003eSignmaking and plastic fabrication\u003c\/li\u003e\n  \u003cli\u003eAluminum routing and milling when properly set up\u003c\/li\u003e\n  \u003cli\u003eSuitable non-ferrous material cutting\u003c\/li\u003e\n  \u003cli\u003eProfiling, slotting, and contouring\u003c\/li\u003e\n  \u003cli\u003eCNC applications requiring efficient chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle O-flute design supports efficient chip evacuation in plastics and softer materials\u003c\/li\u003e\n  \u003cli\u003eUp-cut geometry helps pull chips up and away from the cut\u003c\/li\u003e\n  \u003cli\u003eCan improve bottom-edge cut quality in many routing applications\u003c\/li\u003e\n  \u003cli\u003eO-flute geometry provides large flute volume for chip clearance\u003c\/li\u003e\n  \u003cli\u003e.500\" LOC provides useful cutting reach for profiles, slots, and trimming work\u003c\/li\u003e\n  \u003cli\u003eSquare end geometry is suitable for slotting, profiling, trimming, and general routing work\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction provides rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eStandard 1\/8\" shank fits many compact CNC routers and precision collet setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse;\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eTool Type\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide O-Flute End Mill\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCondition\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNew\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCutting Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e0.1250\" \/ 1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eLength of Cut \/ Flute Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e.500\" \/ 1\/2\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eOverall Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1.50\" \/ 1-1\/2\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eShank Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFlutes\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eGeometry\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eO-Flute\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eEnd Style\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSquare End\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCut Direction\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eUp Cut\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eMaterial\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFinish \/ Coating\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003ePolished Flute \/ Bright Uncoated\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eNeed help choosing starting settings?\u003c\/strong\u003e\u003cbr\u003e\n  See our \u003ca href=\"https:\/\/drillbitsunlimited.com\/pages\/carbide-end-mill-feed-speed-calculator\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003ecarbide end mill feed and speed calculator →\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eLooking for more O-flute carbide end mills?\u003c\/strong\u003e\u003cbr\u003e\n  Shop O-flute carbide end mills here: \u003ca href=\"https:\/\/drillbitsunlimited.com\/collections\/o-flute-end-mills\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003eO-flute end mills →\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Drill Bits Unlimted","offers":[{"title":"Default Title","offer_id":43259357593829,"sku":"MO-180","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/3082\/2885\/files\/m230-gal.jpg?v=1772566265"},{"product_id":"0-0591-1-50mm-x-12mm-flute-length-single-o-flute-carbide-end-mill-tin-coated-m130","title":"0.0591\" (1.5mm) x 12mm LOC TiN Coated Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank | MO-120","description":"\u003cp\u003e\u003cstrong\u003e0.0591\" (1.50mm) x 12mm LOC TiN Coated Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003esingle O-flute carbide end mill\u003c\/strong\u003e features a \u003cstrong\u003e0.0591\" (1.50mm) cutting diameter\u003c\/strong\u003e, \u003cstrong\u003e12mm length of cut\u003c\/strong\u003e, \u003cstrong\u003e1.50\" overall length\u003c\/strong\u003e, and a standard \u003cstrong\u003e1\/8\" shank\u003c\/strong\u003e. The \u003cstrong\u003etitanium nitride (TiN) coating\u003c\/strong\u003e provides added surface hardness and wear resistance compared with uncoated carbide.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eO-flute geometry\u003c\/strong\u003e is especially well suited for cutting \u003cstrong\u003eacrylic, plastic, PVC, and other softer materials\u003c\/strong\u003e. It may also be used in \u003cstrong\u003ealuminum and suitable non-ferrous materials\u003c\/strong\u003e when proper feeds, speeds, chip clearing, and workholding are used.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eup-cut design\u003c\/strong\u003e helps evacuate chips efficiently and can improve \u003cstrong\u003ebottom-edge cut quality\u003c\/strong\u003e in many routing applications. Because up-cut tools pull chips upward, the top edge may require proper hold-down, masking, or finishing depending on the material.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSetup note:\u003c\/strong\u003e This tool has a \u003cstrong\u003e12mm LOC\u003c\/strong\u003e on a \u003cstrong\u003e1.50mm cutting diameter\u003c\/strong\u003e. Use appropriate pass depth, good chip clearing, and secure workholding to reduce deflection, chatter, or tool breakage.\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic and plastic machining\u003c\/li\u003e\n  \u003cli\u003ePVC cutting\u003c\/li\u003e\n  \u003cli\u003eSignmaking and plastic fabrication\u003c\/li\u003e\n  \u003cli\u003eAluminum routing and milling when properly set up\u003c\/li\u003e\n  \u003cli\u003eSuitable non-ferrous material cutting\u003c\/li\u003e\n  \u003cli\u003eProfiling and contouring\u003c\/li\u003e\n  \u003cli\u003eSlotting and detail work\u003c\/li\u003e\n  \u003cli\u003eCNC applications requiring efficient chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle O-flute design supports efficient chip evacuation in plastics and softer materials\u003c\/li\u003e\n  \u003cli\u003eUp-cut geometry helps pull chips up and away from the cut\u003c\/li\u003e\n  \u003cli\u003eCan improve bottom-edge cut quality in many routing applications\u003c\/li\u003e\n  \u003cli\u003eTiN coating provides added wear resistance compared with uncoated carbide\u003c\/li\u003e\n  \u003cli\u003eSmall 1.50mm diameter is useful for detailed CNC work\u003c\/li\u003e\n  \u003cli\u003e12mm LOC provides added cutting reach for small profiles, slots, and detail work\u003c\/li\u003e\n  \u003cli\u003eSquare end geometry is suitable for slotting, profiling, trimming, and general routing work\u003c\/li\u003e\n  \u003cli\u003eStandard 1\/8\" shank fits many compact CNC routers and precision collet setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse;\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eTool Type\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide O-Flute End Mill\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCondition\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNew\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCutting Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e0.0591\" \/ 1.50mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eLength of Cut \/ Flute Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e12mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eOverall Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1.50\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eShank Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFlutes\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eGeometry\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eO-Flute\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eEnd Style\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSquare End\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCut Direction\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eUp Cut\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eMaterial\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFinish \/ Coating\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eTitanium Nitride \/ TiN Coated\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eNeed help choosing starting settings?\u003c\/strong\u003e\u003cbr\u003e\n  See our \u003ca href=\"https:\/\/drillbitsunlimited.com\/pages\/carbide-end-mill-feed-speed-calculator\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003ecarbide end mill feed and speed calculator →\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eLooking for more O-flute carbide end mills?\u003c\/strong\u003e\u003cbr\u003e\n  Shop O-flute carbide end mills here: \u003ca href=\"https:\/\/drillbitsunlimited.com\/collections\/o-flute-end-mills\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003eO-flute end mills →\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Drill Bits Unlimted","offers":[{"title":"Default Title","offer_id":43260158673125,"sku":"MO-120","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/3082\/2885\/files\/m130-single-o-flute-carbide-end-mill-tin-coated-1-50mm-hero.jpg?v=1774882374"},{"product_id":"0-1250-1-8-x-1-25-flute-length-single-o-flute-carbide-end-mill-up-cut-2-25-oal-m123","title":"0.1250\" (1\/8\") x 1.25\" LOC Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank | MO-200","description":"\u003cp\u003e\u003cstrong\u003e0.1250\" (1\/8\") x 1.25\" LOC Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003esingle O-flute carbide end mill\u003c\/strong\u003e features a \u003cstrong\u003e0.1250\" (1\/8\") cutting diameter\u003c\/strong\u003e, \u003cstrong\u003e1.25\" length of cut\u003c\/strong\u003e, \u003cstrong\u003e2.25\" overall length\u003c\/strong\u003e, and a standard \u003cstrong\u003e1\/8\" shank\u003c\/strong\u003e. Its bright, uncoated solid carbide construction makes it a practical choice for CNC routing, milling, profiling, slotting, and trimming in plastics and suitable non-ferrous materials.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003esingle O-flute geometry\u003c\/strong\u003e is especially well suited for cutting \u003cstrong\u003eacrylic, plastic, PVC, and other softer materials\u003c\/strong\u003e. It may also be used in \u003cstrong\u003ealuminum and suitable non-ferrous materials\u003c\/strong\u003e when proper feeds, speeds, chip clearing, and workholding are used.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eup-cut design\u003c\/strong\u003e helps evacuate chips efficiently and can improve \u003cstrong\u003ebottom-edge cut quality\u003c\/strong\u003e in many routing applications. Because up-cut tools pull chips upward, the top edge may require proper hold-down, masking, or finishing depending on the material.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant setup note:\u003c\/strong\u003e This tool has a very long \u003cstrong\u003e1.25\" LOC\u003c\/strong\u003e relative to its \u003cstrong\u003e1\/8\" cutting diameter\u003c\/strong\u003e. Use light passes, conservative feeds, good chip clearing, and secure workholding to reduce deflection, chatter, heat buildup, or tool breakage.\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic and plastic machining\u003c\/li\u003e\n  \u003cli\u003ePVC cutting\u003c\/li\u003e\n  \u003cli\u003eSignmaking and plastic fabrication\u003c\/li\u003e\n  \u003cli\u003eAluminum routing and milling when properly set up\u003c\/li\u003e\n  \u003cli\u003eSuitable non-ferrous material cutting\u003c\/li\u003e\n  \u003cli\u003eProfiling and contouring\u003c\/li\u003e\n  \u003cli\u003eSlotting and edge trimming\u003c\/li\u003e\n  \u003cli\u003eCNC applications requiring efficient chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle O-flute design supports efficient chip evacuation in plastics and softer materials\u003c\/li\u003e\n  \u003cli\u003eUp-cut geometry helps pull chips up and away from the cut\u003c\/li\u003e\n  \u003cli\u003eCan improve bottom-edge cut quality in many routing applications\u003c\/li\u003e\n  \u003cli\u003eLong 1.25\" LOC provides extra reach for deeper routing, profiling, and trimming applications\u003c\/li\u003e\n  \u003cli\u003eSquare end geometry is suitable for slotting, profiling, trimming, and general routing work\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction provides rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eStandard 1\/8\" shank fits many compact CNC routers and precision collet setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse;\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eTool Type\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide O-Flute End Mill\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCondition\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNew\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCutting Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e0.1250\" \/ 1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eLength of Cut \/ Flute Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1.25\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eOverall Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e2.25\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eShank Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFlutes\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eGeometry\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eO-Flute\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eEnd Style\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSquare End\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCut Direction\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eUp Cut\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eMaterial\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFinish \/ Coating\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eBright \/ Uncoated\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eNeed help choosing starting settings?\u003c\/strong\u003e\u003cbr\u003e\n  See our \u003ca href=\"https:\/\/drillbitsunlimited.com\/pages\/carbide-end-mill-feed-speed-calculator\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003ecarbide end mill feed and speed calculator →\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eLooking for more O-flute carbide end mills?\u003c\/strong\u003e\u003cbr\u003e\n  Shop O-flute carbide end mills here: \u003ca href=\"https:\/\/drillbitsunlimited.com\/collections\/o-flute-end-mills\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003eO-flute end mills →\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Drill Bits Unlimted","offers":[{"title":"Default Title","offer_id":43260171026661,"sku":"MO-200","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/3082\/2885\/files\/m123-single-o-flute-carbide-end-mill-1-8-inch-hero.jpg?v=1774883213"},{"product_id":"1-8-downcut-o-flute-end-mill","title":"0.1250\" (1\/8\") x 1\/2\" LOC O-Flute Down-Cut Solid Carbide End Mill – 1\/8\" Shank – 1\/2\" Cut Length – Acrylic Plastic Aluminum MO-210","description":"\u003cp\u003e\u003cstrong\u003e0.1250\" (1\/8\") x .500\" LOC Down-Cut Single O-Flute Carbide End Mill, 1\/8\" Shank\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003e1\/8\" down-cut single O-flute carbide end mill\u003c\/strong\u003e features a \u003cstrong\u003e0.1250\" (1\/8\") cutting diameter\u003c\/strong\u003e, \u003cstrong\u003e.500\" length of cut\u003c\/strong\u003e, \u003cstrong\u003e1.50\" overall length\u003c\/strong\u003e, and a standard \u003cstrong\u003e1\/8\" shank\u003c\/strong\u003e. It is designed for precision CNC routing, profiling, slotting, and trimming in plastics, laminates, and suitable non-ferrous materials.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003esingle O-flute geometry\u003c\/strong\u003e is especially well suited for cutting \u003cstrong\u003eacrylic, plastic, PVC, ABS, HDPE, polycarbonate, and other softer materials\u003c\/strong\u003e. It may also be used in \u003cstrong\u003ealuminum and suitable non-ferrous materials\u003c\/strong\u003e when proper feeds, speeds, chip clearing, and workholding are used.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003edown-cut design\u003c\/strong\u003e pushes cutting forces and chips downward, which can help reduce top-edge lifting, chipping, or fraying. This makes it useful when a clean top surface is important, especially in plastics, laminates, sheet materials, and CNC inlay-type work.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant setup note:\u003c\/strong\u003e Down-cut tools push chips downward into the cut instead of lifting them out. Use proper chip clearing, conservative pass depth, secure workholding, and appropriate feeds and speeds to reduce heat buildup, recutting, chatter, or tool breakage.\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic and plastic machining\u003c\/li\u003e\n  \u003cli\u003ePVC, ABS, HDPE, and polycarbonate cutting\u003c\/li\u003e\n  \u003cli\u003eLaminates and sheet materials where top-edge finish is important\u003c\/li\u003e\n  \u003cli\u003eSignmaking and plastic fabrication\u003c\/li\u003e\n  \u003cli\u003eCNC inlay and detail routing\u003c\/li\u003e\n  \u003cli\u003eAluminum routing and milling when properly set up\u003c\/li\u003e\n  \u003cli\u003eSuitable non-ferrous material cutting\u003c\/li\u003e\n  \u003cli\u003eProfiling, slotting, and contouring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle O-flute design supports efficient cutting in plastics and softer materials\u003c\/li\u003e\n  \u003cli\u003eDown-cut geometry helps improve top-edge finish by pushing cutting forces downward\u003c\/li\u003e\n  \u003cli\u003eUseful when reducing top-surface chipping, lifting, or fraying is important\u003c\/li\u003e\n  \u003cli\u003eO-flute geometry provides large flute volume for chip clearance\u003c\/li\u003e\n  \u003cli\u003e.500\" LOC provides useful cutting reach for profiles, slots, and trimming work\u003c\/li\u003e\n  \u003cli\u003eSquare end geometry is suitable for slotting, profiling, trimming, and general routing work\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction provides rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eStandard 1\/8\" shank fits many compact CNC routers and precision collet setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse;\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eTool Type\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide O-Flute End Mill\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCondition\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNew\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCutting Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e0.1250\" \/ 1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eLength of Cut \/ Flute Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e.500\" \/ 1\/2\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eOverall Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1.50\" \/ 1-1\/2\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eShank Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFlutes\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eGeometry\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eO-Flute\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eEnd Style\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSquare End\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCut Direction\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eDown Cut\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eMaterial\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFinish \/ Coating\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eBright \/ Uncoated\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eNeed help choosing starting settings?\u003c\/strong\u003e\u003cbr\u003e\n  See our \u003ca href=\"https:\/\/drillbitsunlimited.com\/pages\/carbide-end-mill-feed-speed-calculator\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003ecarbide end mill feed and speed calculator →\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eLooking for more O-flute carbide end mills?\u003c\/strong\u003e\u003cbr\u003e\n  Shop O-flute carbide end mills here: \u003ca href=\"https:\/\/drillbitsunlimited.com\/collections\/o-flute-end-mills\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003eO-flute end mills →\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Drill Bits Unlimted","offers":[{"title":"Default Title","offer_id":43260264382693,"sku":"MO-210","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/3082\/2885\/files\/m231-gal.jpg?v=1772566319"},{"product_id":"0-0591-1-50mm-x-8mm-flute-length-single-o-flute-carbide-end-mill-tin-coated-m129","title":"0.0591\" (1.5mm) x 8mm LOC TiN Coated Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank | MO-130","description":"\u003cp\u003e\u003cstrong\u003e0.0591\" (1.50mm) x 8mm LOC TiN Coated Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003esingle O-flute carbide end mill\u003c\/strong\u003e features a \u003cstrong\u003e0.0591\" (1.50mm) cutting diameter\u003c\/strong\u003e, \u003cstrong\u003e8mm length of cut\u003c\/strong\u003e, \u003cstrong\u003e1.50\" overall length\u003c\/strong\u003e, and a standard \u003cstrong\u003e1\/8\" shank\u003c\/strong\u003e. The \u003cstrong\u003etitanium nitride (TiN) coating\u003c\/strong\u003e provides added surface hardness and wear resistance compared with uncoated carbide.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eO-flute geometry\u003c\/strong\u003e is especially well suited for cutting \u003cstrong\u003eacrylic, plastic, PVC, and other softer materials\u003c\/strong\u003e. It may also be used in \u003cstrong\u003ealuminum and suitable non-ferrous materials\u003c\/strong\u003e when proper feeds, speeds, chip clearing, and workholding are used.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eup-cut design\u003c\/strong\u003e helps evacuate chips efficiently and can improve \u003cstrong\u003ebottom-edge cut quality\u003c\/strong\u003e in many routing applications. Because up-cut tools pull chips upward, the top edge may require proper hold-down, masking, or finishing depending on the material.\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic and plastic machining\u003c\/li\u003e\n  \u003cli\u003ePVC cutting\u003c\/li\u003e\n  \u003cli\u003eSignmaking and plastic fabrication\u003c\/li\u003e\n  \u003cli\u003eAluminum routing and milling when properly set up\u003c\/li\u003e\n  \u003cli\u003eSuitable non-ferrous material cutting\u003c\/li\u003e\n  \u003cli\u003eProfiling and contouring\u003c\/li\u003e\n  \u003cli\u003eSlotting and detail work\u003c\/li\u003e\n  \u003cli\u003eCNC applications requiring efficient chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle O-flute design supports efficient chip evacuation in plastics and softer materials\u003c\/li\u003e\n  \u003cli\u003eUp-cut geometry helps pull chips up and away from the cut\u003c\/li\u003e\n  \u003cli\u003eCan improve bottom-edge cut quality in many routing applications\u003c\/li\u003e\n  \u003cli\u003eTiN coating provides added wear resistance compared with uncoated carbide\u003c\/li\u003e\n  \u003cli\u003eSmall 1.50mm diameter is useful for detailed CNC work\u003c\/li\u003e\n  \u003cli\u003e8mm LOC provides useful cutting reach for small profiles, slots, and detail work\u003c\/li\u003e\n  \u003cli\u003eSquare end geometry is suitable for slotting, profiling, trimming, and general routing work\u003c\/li\u003e\n  \u003cli\u003eStandard 1\/8\" shank fits many compact CNC routers and precision collet setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse;\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eTool Type\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide O-Flute End Mill\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCondition\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNew\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCutting Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e0.0591\" \/ 1.50mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eLength of Cut \/ Flute Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e8mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eOverall Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1.50\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eShank Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFlutes\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eGeometry\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eO-Flute\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eEnd Style\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSquare End\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCut Direction\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eUp Cut\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eMaterial\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFinish \/ Coating\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eTitanium Nitride \/ TiN Coated\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eNeed help choosing starting settings?\u003c\/strong\u003e\u003cbr\u003e\n  See our \u003ca href=\"https:\/\/drillbitsunlimited.com\/pages\/carbide-end-mill-feed-speed-calculator\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003ecarbide end mill feed and speed calculator →\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eLooking for more O-flute carbide end mills?\u003c\/strong\u003e\u003cbr\u003e\n  Shop O-flute carbide end mills here: \u003ca href=\"https:\/\/drillbitsunlimited.com\/collections\/o-flute-end-mills\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003eO-flute end mills →\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Drill Bits Unlimted","offers":[{"title":"Default Title","offer_id":43260286501093,"sku":"MO-130","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/3082\/2885\/files\/m129-single-o-flute-carbide-end-mill-tin-coated-1-50mm-hero.jpg?v=1774882124"},{"product_id":"0-1250-1-8-x-1-00-flute-length-single-o-flute-carbide-end-mill-up-cut-1-80-oal-m122","title":"0.1250\" (1\/8\") x 1.00\" LOC Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank | MO-190","description":"\u003cp\u003e\u003cstrong\u003e0.1250\" (1\/8\") x 1.00\" LOC Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003esingle O-flute carbide end mill\u003c\/strong\u003e features a \u003cstrong\u003e0.1250\" (1\/8\") cutting diameter\u003c\/strong\u003e, \u003cstrong\u003e1.00\" length of cut\u003c\/strong\u003e, \u003cstrong\u003e1.80\" overall length\u003c\/strong\u003e, and a standard \u003cstrong\u003e1\/8\" shank\u003c\/strong\u003e. Its bright, uncoated solid carbide construction makes it a practical choice for CNC routing, milling, profiling, slotting, and trimming in plastics and suitable non-ferrous materials.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003esingle O-flute geometry\u003c\/strong\u003e is especially well suited for cutting \u003cstrong\u003eacrylic, plastic, PVC, and other softer materials\u003c\/strong\u003e. It may also be used in \u003cstrong\u003ealuminum and suitable non-ferrous materials\u003c\/strong\u003e when proper feeds, speeds, chip clearing, and workholding are used.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eup-cut design\u003c\/strong\u003e helps evacuate chips efficiently and can improve \u003cstrong\u003ebottom-edge cut quality\u003c\/strong\u003e in many routing applications. Because up-cut tools pull chips upward, the top edge may require proper hold-down, masking, or finishing depending on the material.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant setup note:\u003c\/strong\u003e This tool has a long \u003cstrong\u003e1.00\" LOC\u003c\/strong\u003e relative to its \u003cstrong\u003e1\/8\" cutting diameter\u003c\/strong\u003e. Use light passes, conservative feeds, good chip clearing, and secure workholding to reduce deflection, chatter, heat buildup, or tool breakage.\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic and plastic machining\u003c\/li\u003e\n  \u003cli\u003ePVC cutting\u003c\/li\u003e\n  \u003cli\u003eSignmaking and plastic fabrication\u003c\/li\u003e\n  \u003cli\u003eAluminum routing and milling when properly set up\u003c\/li\u003e\n  \u003cli\u003eSuitable non-ferrous material cutting\u003c\/li\u003e\n  \u003cli\u003eProfiling and contouring\u003c\/li\u003e\n  \u003cli\u003eSlotting and edge trimming\u003c\/li\u003e\n  \u003cli\u003eCNC applications requiring efficient chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle O-flute design supports efficient chip evacuation in plastics and softer materials\u003c\/li\u003e\n  \u003cli\u003eUp-cut geometry helps pull chips up and away from the cut\u003c\/li\u003e\n  \u003cli\u003eCan improve bottom-edge cut quality in many routing applications\u003c\/li\u003e\n  \u003cli\u003e1.00\" LOC provides useful reach for deeper routing, profiling, and trimming applications\u003c\/li\u003e\n  \u003cli\u003eSquare end geometry is suitable for slotting, profiling, trimming, and general routing work\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction provides rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eStandard 1\/8\" shank fits many compact CNC routers and precision collet setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse;\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eTool Type\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide O-Flute End Mill\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCondition\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNew\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCutting Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e0.1250\" \/ 1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eLength of Cut \/ Flute Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1.00\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eOverall Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1.80\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eShank Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFlutes\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eGeometry\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eO-Flute\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eEnd Style\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSquare End\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCut Direction\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eUp Cut\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eMaterial\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFinish \/ Coating\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eBright \/ Uncoated\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eNeed help choosing starting settings?\u003c\/strong\u003e\u003cbr\u003e\n  See our \u003ca href=\"https:\/\/drillbitsunlimited.com\/pages\/carbide-end-mill-feed-speed-calculator\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003ecarbide end mill feed and speed calculator →\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eLooking for more O-flute carbide end mills?\u003c\/strong\u003e\u003cbr\u003e\n  Shop O-flute carbide end mills here: \u003ca href=\"https:\/\/drillbitsunlimited.com\/collections\/o-flute-end-mills\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003eO-flute end mills →\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Drill Bits Unlimted","offers":[{"title":"Default Title","offer_id":43260346499301,"sku":"MO-190","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/3082\/2885\/files\/m122-single-o-flute-carbide-end-mill-1-8-inch-hero.jpg?v=1774883569"},{"product_id":"0-2500-1-4-x-1-00-flute-length-up-cut-single-o-flute-carbide-end-mill-2-00-oal-m227","title":"0.2500\" (1\/4\") x 1.00\" LOC Single O-Flute Carbide End Mill, Up Cut, 1\/4\" Shank | MO-250","description":"\u003cp\u003e\u003cstrong\u003e0.2500\" (1\/4\") x 1.00\" LOC Single O-Flute Carbide End Mill, Up Cut, 1\/4\" Shank\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003eup-cut single O-flute carbide end mill\u003c\/strong\u003e features a \u003cstrong\u003e0.2500\" (1\/4\") cutting diameter\u003c\/strong\u003e, \u003cstrong\u003e1.00\" length of cut\u003c\/strong\u003e, \u003cstrong\u003e2.00\" overall length\u003c\/strong\u003e, and a \u003cstrong\u003e1\/4\" shank\u003c\/strong\u003e. Its bright, uncoated solid carbide construction makes it a practical choice for CNC routing, milling, profiling, slotting, and trimming in plastics and suitable non-ferrous materials.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003esingle O-flute geometry\u003c\/strong\u003e is especially well suited for cutting \u003cstrong\u003eacrylic, plastic, PVC, and other softer materials\u003c\/strong\u003e. It may also be used in \u003cstrong\u003ealuminum and suitable non-ferrous materials\u003c\/strong\u003e when proper feeds, speeds, chip clearing, and workholding are used.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eup-cut design\u003c\/strong\u003e helps evacuate chips efficiently and can improve \u003cstrong\u003ebottom-edge cut quality\u003c\/strong\u003e in many routing applications. Because up-cut tools pull chips upward, the top edge may require proper hold-down, masking, or finishing depending on the material.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSetup note:\u003c\/strong\u003e This tool has a \u003cstrong\u003e1.00\" LOC\u003c\/strong\u003e. Use appropriate pass depth, good chip clearing, and secure workholding to reduce deflection, chatter, heat buildup, or tool breakage.\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic and plastic machining\u003c\/li\u003e\n  \u003cli\u003ePVC cutting\u003c\/li\u003e\n  \u003cli\u003eSignmaking and plastic fabrication\u003c\/li\u003e\n  \u003cli\u003eAluminum routing and milling when properly set up\u003c\/li\u003e\n  \u003cli\u003eSuitable non-ferrous material cutting\u003c\/li\u003e\n  \u003cli\u003eProfiling and contouring\u003c\/li\u003e\n  \u003cli\u003eSlotting and edge trimming\u003c\/li\u003e\n  \u003cli\u003eCNC applications requiring efficient chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle O-flute design supports efficient chip evacuation in plastics and softer materials\u003c\/li\u003e\n  \u003cli\u003eUp-cut geometry helps pull chips up and away from the cut\u003c\/li\u003e\n  \u003cli\u003eCan improve bottom-edge cut quality in many routing applications\u003c\/li\u003e\n  \u003cli\u003e1.00\" LOC provides useful reach for deeper routing, profiling, and trimming applications\u003c\/li\u003e\n  \u003cli\u003eSquare end geometry is suitable for slotting, profiling, trimming, and general routing work\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction provides rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003e1\/4\" shank offers a sturdier setup for many CNC routers and compatible collets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse;\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eTool Type\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide O-Flute End Mill\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCondition\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNew\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCutting Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e0.2500\" \/ 1\/4\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eLength of Cut \/ Flute Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1.00\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eOverall Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e2.00\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eShank Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\/4\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFlutes\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eGeometry\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eO-Flute\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eEnd Style\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSquare End\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCut Direction\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eUp Cut\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eMaterial\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFinish \/ Coating\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eBright \/ Uncoated\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eNeed help choosing starting settings?\u003c\/strong\u003e\u003cbr\u003e\n  See our \u003ca href=\"https:\/\/drillbitsunlimited.com\/pages\/carbide-end-mill-feed-speed-calculator\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003ecarbide end mill feed and speed calculator →\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eLooking for more O-flute carbide end mills?\u003c\/strong\u003e\u003cbr\u003e\n  Shop O-flute carbide end mills here: \u003ca href=\"https:\/\/drillbitsunlimited.com\/collections\/o-flute-end-mills\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003eO-flute end mills →\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Drill Bits Unlimted","offers":[{"title":"Default Title","offer_id":43260370026725,"sku":"MO-250","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/3082\/2885\/files\/m227-up-cut-single-o-flute-carbide-end-mill-1-4-inch-hero.jpg?v=1774887821"},{"product_id":"0-0787-2-00mm-x-6mm-flute-length-single-o-flute-carbide-end-mill-tin-coated-m125","title":"0.0787\" (2.00mm) x 6mm LOC TiN Coated Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank | MO-160","description":"\u003cp\u003e\u003cstrong\u003e0.0787\" (2.00mm) x 6mm LOC TiN Coated Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003esingle O-flute carbide end mill\u003c\/strong\u003e features a \u003cstrong\u003e0.0787\" (2.00mm) cutting diameter\u003c\/strong\u003e, \u003cstrong\u003e6mm length of cut\u003c\/strong\u003e, \u003cstrong\u003e1.50\" overall length\u003c\/strong\u003e, and a standard \u003cstrong\u003e1\/8\" shank\u003c\/strong\u003e. The \u003cstrong\u003etitanium nitride (TiN) coating\u003c\/strong\u003e provides added surface hardness and wear resistance compared with uncoated carbide.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eO-flute geometry\u003c\/strong\u003e is especially well suited for cutting \u003cstrong\u003eacrylic, plastic, PVC, and other softer materials\u003c\/strong\u003e. It may also be used in \u003cstrong\u003ealuminum and suitable non-ferrous materials\u003c\/strong\u003e when proper feeds, speeds, chip clearing, and workholding are used.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eup-cut design\u003c\/strong\u003e helps evacuate chips efficiently and can improve \u003cstrong\u003ebottom-edge cut quality\u003c\/strong\u003e in many routing applications. Because up-cut tools pull chips upward, the top edge may require proper hold-down, masking, or finishing depending on the material.\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic and plastic machining\u003c\/li\u003e\n  \u003cli\u003ePVC cutting\u003c\/li\u003e\n  \u003cli\u003eSignmaking and plastic fabrication\u003c\/li\u003e\n  \u003cli\u003eAluminum routing and milling when properly set up\u003c\/li\u003e\n  \u003cli\u003eSuitable non-ferrous material cutting\u003c\/li\u003e\n  \u003cli\u003eProfiling and contouring\u003c\/li\u003e\n  \u003cli\u003eSlotting and detail work\u003c\/li\u003e\n  \u003cli\u003eCNC applications requiring efficient chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle O-flute design supports efficient chip evacuation in plastics and softer materials\u003c\/li\u003e\n  \u003cli\u003eUp-cut geometry helps pull chips up and away from the cut\u003c\/li\u003e\n  \u003cli\u003eCan improve bottom-edge cut quality in many routing applications\u003c\/li\u003e\n  \u003cli\u003eTiN coating provides added wear resistance compared with uncoated carbide\u003c\/li\u003e\n  \u003cli\u003e6mm LOC is useful for shallow to moderate-depth profiling, slotting, and detail work\u003c\/li\u003e\n  \u003cli\u003eSquare end geometry is suitable for slotting, profiling, trimming, and general routing work\u003c\/li\u003e\n  \u003cli\u003eStandard 1\/8\" shank fits many compact CNC routers and precision collet setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse;\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eTool Type\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide O-Flute End Mill\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCondition\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNew\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCutting Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e0.0787\" \/ 2.00mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eLength of Cut \/ Flute Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e6mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eOverall Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1.50\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eShank Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFlutes\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eGeometry\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eO-Flute\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eEnd Style\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSquare End\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCut Direction\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eUp Cut\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eMaterial\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFinish \/ Coating\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eTitanium Nitride \/ TiN Coated\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eNeed help choosing starting settings?\u003c\/strong\u003e\u003cbr\u003e\n  See our \u003ca href=\"https:\/\/drillbitsunlimited.com\/pages\/carbide-end-mill-feed-speed-calculator\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003ecarbide end mill feed and speed calculator →\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eLooking for more O-flute carbide end mills?\u003c\/strong\u003e\u003cbr\u003e\n  Shop O-flute carbide end mills here: \u003ca href=\"https:\/\/drillbitsunlimited.com\/collections\/o-flute-end-mills\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003eO-flute end mills →\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Drill Bits Unlimted","offers":[{"title":"Default Title","offer_id":43260383953125,"sku":"MO-160","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/3082\/2885\/files\/m125-single-o-flute-carbide-end-mill-tin-coated-2-00mm-hero.jpg?v=1774882878"},{"product_id":"1-4-downcut-o-flute-carbide-end-mill-m228","title":"0.2500\" (1\/4\") Down-Cut O-Flute Solid Carbide End Mill – 1\/4\" Shank – Aluminum \u0026 Plastics MO-240","description":"\u003cp\u003e\u003cstrong\u003e0.2500\" (1\/4\") x 1.00\" LOC Down-Cut Single O-Flute Carbide End Mill, 1\/4\" Shank\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003e1\/4\" down-cut single O-flute carbide end mill\u003c\/strong\u003e features a \u003cstrong\u003e0.2500\" (1\/4\") cutting diameter\u003c\/strong\u003e, \u003cstrong\u003e1.00\" length of cut\u003c\/strong\u003e, \u003cstrong\u003e2.00\" overall length\u003c\/strong\u003e, and a \u003cstrong\u003e1\/4\" shank\u003c\/strong\u003e. It is designed for CNC routing, profiling, slotting, and trimming in plastics, laminates, and suitable non-ferrous materials.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003esingle O-flute geometry\u003c\/strong\u003e is especially well suited for cutting \u003cstrong\u003eacrylic, plastic, PVC, ABS, HDPE, polycarbonate, and other softer materials\u003c\/strong\u003e. It may also be used in \u003cstrong\u003ealuminum and suitable non-ferrous materials\u003c\/strong\u003e when proper feeds, speeds, chip clearing, and workholding are used.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003edown-cut design\u003c\/strong\u003e pushes cutting forces and chips downward, which can help reduce top-edge lifting, chipping, or fraying. This makes it useful when a clean top surface is important, especially in plastics, laminates, and sheet materials.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant setup note:\u003c\/strong\u003e Down-cut tools push chips downward into the cut instead of lifting them out. Use proper chip clearing, conservative pass depth, secure workholding, and appropriate feeds and speeds to reduce heat buildup, recutting, chatter, or tool breakage.\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic and plastic machining\u003c\/li\u003e\n  \u003cli\u003ePVC, ABS, HDPE, and polycarbonate cutting\u003c\/li\u003e\n  \u003cli\u003eLaminates and sheet materials where top-edge finish is important\u003c\/li\u003e\n  \u003cli\u003eSignmaking and plastic fabrication\u003c\/li\u003e\n  \u003cli\u003eAluminum routing and milling when properly set up\u003c\/li\u003e\n  \u003cli\u003eSuitable non-ferrous material cutting\u003c\/li\u003e\n  \u003cli\u003eProfiling, slotting, and contouring\u003c\/li\u003e\n  \u003cli\u003eCNC routing where reduced top-edge lifting is desired\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle O-flute design supports efficient cutting in plastics and softer materials\u003c\/li\u003e\n  \u003cli\u003eDown-cut geometry helps improve top-edge finish by pushing cutting forces downward\u003c\/li\u003e\n  \u003cli\u003eUseful when reducing top-surface chipping, lifting, or fraying is important\u003c\/li\u003e\n  \u003cli\u003eO-flute geometry provides large flute volume for chip clearance\u003c\/li\u003e\n  \u003cli\u003e1.00\" LOC provides useful cutting reach for deeper profiles and trimming work\u003c\/li\u003e\n  \u003cli\u003eSquare end geometry is suitable for slotting, profiling, trimming, and general routing work\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction provides rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003e1\/4\" shank fits compatible CNC routers, collets, and toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse;\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eTool Type\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide O-Flute End Mill\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCondition\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNew\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCutting Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e0.2500\" \/ 1\/4\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eLength of Cut \/ Flute Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1.00\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eOverall Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e2.00\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eShank Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\/4\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFlutes\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eGeometry\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eO-Flute\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eEnd Style\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSquare End\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCut Direction\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eDown Cut\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCutting Rotation\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eLeft Hand\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eMaterial\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFinish \/ Coating\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003ePolished Flute \/ Bright Uncoated\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eNeed help choosing starting settings?\u003c\/strong\u003e\u003cbr\u003e\n  See our \u003ca href=\"https:\/\/drillbitsunlimited.com\/pages\/carbide-end-mill-feed-speed-calculator\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003ecarbide end mill feed and speed calculator →\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eLooking for more O-flute carbide end mills?\u003c\/strong\u003e\u003cbr\u003e\n  Shop O-flute carbide end mills here: \u003ca href=\"https:\/\/drillbitsunlimited.com\/collections\/o-flute-end-mills\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003eO-flute end mills →\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Drill Bits Unlimted","offers":[{"title":"Default Title","offer_id":43271449346277,"sku":"MO-240","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/3082\/2885\/files\/m228-gal.jpg?v=1772561907"},{"product_id":"1-8-nano-coated-o-flute-carbide-end-mill-400-loc-mo-220","title":"0.1250\" (1\/8\") x .400\" LOC Nano-Coated Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank | MO-220","description":"\u003cp\u003e\u003cstrong\u003e0.1250\" (1\/8\") x .400\" LOC Nano-Coated Single O-Flute Carbide End Mill, 1\/8\" Shank\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003esingle O-flute carbide end mill\u003c\/strong\u003e features a \u003cstrong\u003e0.1250\" (1\/8\") cutting diameter\u003c\/strong\u003e, \u003cstrong\u003e.400\" length of cut\u003c\/strong\u003e, \u003cstrong\u003e2.00\" overall length\u003c\/strong\u003e, and a standard \u003cstrong\u003e1\/8\" shank\u003c\/strong\u003e. It has a supplier-described \u003cstrong\u003enano coated finish\u003c\/strong\u003e with a blue multicolor appearance.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003esingle O-flute geometry\u003c\/strong\u003e is especially well suited for cutting \u003cstrong\u003eacrylic, plastic, PVC, and other softer materials\u003c\/strong\u003e. It may also be used in \u003cstrong\u003ealuminum and suitable non-ferrous materials\u003c\/strong\u003e when proper feeds, speeds, chip clearing, and workholding are used.\u003c\/p\u003e\n\n\u003cp\u003eThis tool may also be useful for light wood routing, signmaking, plastic fabrication, trimming, profiling, and general CNC detail work where a 1\/8\" single-flute cutter is appropriate.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCoating note:\u003c\/strong\u003e “Nano coated” is the supplier’s coating description. Because the exact coating chemistry is not specified, it is best treated as a coated \/ multicolor-finish carbide O-flute tool rather than a confirmed TiN, AlTiN, TiAlN, DLC, or diamond-coated cutter.\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic and plastic machining\u003c\/li\u003e\n  \u003cli\u003ePVC cutting\u003c\/li\u003e\n  \u003cli\u003eSignmaking and plastic fabrication\u003c\/li\u003e\n  \u003cli\u003eAluminum routing and milling when properly set up\u003c\/li\u003e\n  \u003cli\u003eSuitable non-ferrous material cutting\u003c\/li\u003e\n  \u003cli\u003eLight wood routing\u003c\/li\u003e\n  \u003cli\u003eProfiling, slotting, and trimming\u003c\/li\u003e\n  \u003cli\u003eCNC applications requiring efficient chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle O-flute geometry supports efficient chip evacuation in plastics and softer materials\u003c\/li\u003e\n  \u003cli\u003eUseful for routing and milling acrylic, PVC, plastics, and suitable non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003e.400\" LOC provides useful cutting reach for profiling, slotting, and trimming work\u003c\/li\u003e\n  \u003cli\u003eSquare end geometry is suitable for slotting, profiling, trimming, and general routing work\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction provides rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eStandard 1\/8\" shank fits many compact CNC routers and precision collet setups\u003c\/li\u003e\n  \u003cli\u003eBlue multicolor coated finish helps distinguish the tool from uncoated carbide cutters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse;\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eTool Type\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide O-Flute End Mill\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCondition\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNew\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCutting Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e0.1250\" \/ 1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eLength of Cut \/ Flute Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e.400\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eOverall Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e2.00\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eShank Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFlutes\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eGeometry\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eO-Flute\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eEnd Style\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSquare End\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCut Direction\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNot specified\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eMaterial\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFinish \/ Coating\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNano Coated \/ Blue Multicolor Coated Finish\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eSKU\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eMO-220\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eNeed help choosing starting settings?\u003c\/strong\u003e\u003cbr\u003e\n  See our \u003ca href=\"https:\/\/drillbitsunlimited.com\/pages\/carbide-end-mill-feed-speed-calculator\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003ecarbide end mill feed and speed calculator →\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eLooking for more O-flute carbide end mills?\u003c\/strong\u003e\u003cbr\u003e\n  Shop O-flute carbide end mills here: \u003ca href=\"https:\/\/drillbitsunlimited.com\/collections\/o-flute-end-mills\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003eO-flute end mills →\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Drill Bits Unlimted","offers":[{"title":"Default Title","offer_id":46275900604645,"sku":"MO-220","price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/3082\/2885\/files\/m235-a-gal.jpg?v=1729793824"},{"product_id":"1-8-single-o-flute-carbide-end-mill-with-400-loc-1-8-shank-and-multicolor-ultra-coated-finish-for-plastics-acrylic-aluminum-and-cnc-routing","title":"0.1250\" (1\/8\") x .400\" LOC Ultra-Coated Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank | MO-230","description":"\u003cp\u003e\u003cstrong\u003e0.1250\" (1\/8\") x .400\" LOC Ultra-Coated Single O-Flute Carbide End Mill, 1\/8\" Shank\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003esingle O-flute carbide end mill\u003c\/strong\u003e features a \u003cstrong\u003e0.1250\" (1\/8\") cutting diameter\u003c\/strong\u003e, \u003cstrong\u003e.400\" length of cut\u003c\/strong\u003e, \u003cstrong\u003e2.00\" overall length\u003c\/strong\u003e, and a standard \u003cstrong\u003e1\/8\" shank\u003c\/strong\u003e. It has a supplier-described \u003cstrong\u003eUltra Surface Coating\u003c\/strong\u003e with a multicolor coated finish.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003esingle O-flute geometry\u003c\/strong\u003e is especially well suited for cutting \u003cstrong\u003eacrylic, plastic, PVC, and other softer materials\u003c\/strong\u003e. It may also be used in \u003cstrong\u003ealuminum and suitable non-ferrous materials\u003c\/strong\u003e when proper feeds, speeds, chip clearing, and workholding are used.\u003c\/p\u003e\n\n\u003cp\u003eThis tool may also be useful for light wood routing, signmaking, plastic fabrication, trimming, profiling, and general CNC detail work where a 1\/8\" single-flute cutter is appropriate.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCoating note:\u003c\/strong\u003e “Ultra Surface Coating” is the supplier’s coating description. Because the exact coating chemistry is not specified, it is best treated as a coated \/ multicolor-finish carbide O-flute tool rather than a confirmed TiN, AlTiN, TiAlN, DLC, or diamond-coated cutter.\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic and plastic machining\u003c\/li\u003e\n  \u003cli\u003ePVC cutting\u003c\/li\u003e\n  \u003cli\u003eSignmaking and plastic fabrication\u003c\/li\u003e\n  \u003cli\u003eAluminum routing and milling when properly set up\u003c\/li\u003e\n  \u003cli\u003eSuitable non-ferrous material cutting\u003c\/li\u003e\n  \u003cli\u003eLight wood routing\u003c\/li\u003e\n  \u003cli\u003eProfiling, slotting, and trimming\u003c\/li\u003e\n  \u003cli\u003eCNC applications requiring efficient chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle O-flute geometry supports efficient chip evacuation in plastics and softer materials\u003c\/li\u003e\n  \u003cli\u003eUseful for routing and milling acrylic, PVC, plastics, and suitable non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003e.400\" LOC provides useful cutting reach for profiling, slotting, and trimming work\u003c\/li\u003e\n  \u003cli\u003eSquare end geometry is suitable for slotting, profiling, trimming, and general routing work\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction provides rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eStandard 1\/8\" shank fits many compact CNC routers and precision collet setups\u003c\/li\u003e\n  \u003cli\u003eMulticolor coated finish helps distinguish the tool from uncoated carbide cutters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse;\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eTool Type\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide O-Flute End Mill\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCondition\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNew\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCutting Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e0.1250\" \/ 1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eLength of Cut \/ Flute Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e.400\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eOverall Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e2.00\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eShank Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFlutes\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eGeometry\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eO-Flute\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eEnd Style\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSquare End\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCut Direction\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNot specified\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eMaterial\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFinish \/ Coating\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eUltra Surface Coating \/ Multicolor Coated Finish\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eSKU\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eMO-230\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eNeed help choosing starting settings?\u003c\/strong\u003e\u003cbr\u003e\n  See our \u003ca href=\"https:\/\/drillbitsunlimited.com\/pages\/carbide-end-mill-feed-speed-calculator\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003ecarbide end mill feed and speed calculator →\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eLooking for more O-flute carbide end mills?\u003c\/strong\u003e\u003cbr\u003e\n  Shop O-flute carbide end mills here: \u003ca href=\"https:\/\/drillbitsunlimited.com\/collections\/o-flute-end-mills\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003eO-flute end mills →\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Drill Bits Unlimted","offers":[{"title":"Default Title","offer_id":46281890496741,"sku":"MO-230","price":8.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/3082\/2885\/files\/m235-b-gal_New.jpg?v=1730123672"},{"product_id":"0-0787-2-00mm-x-8mm-flute-length-single-o-flute-carbide-end-mill-up-cut-1-8-shank-m119-s","title":"0.0787\" (2.00mm) x 8mm LOC Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank | MO-170","description":"\u003cp\u003e\u003cstrong\u003e0.0787\" (2.00mm) x 8mm LOC Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003esingle O-flute carbide end mill\u003c\/strong\u003e features a \u003cstrong\u003e0.0787\" (2.00mm) cutting diameter\u003c\/strong\u003e, \u003cstrong\u003e8mm length of cut\u003c\/strong\u003e, \u003cstrong\u003e1.50\" overall length\u003c\/strong\u003e, and a standard \u003cstrong\u003e1\/8\" shank\u003c\/strong\u003e. Its solid carbide construction makes it a practical choice for CNC routing, milling, profiling, slotting, and trimming in plastics and suitable non-ferrous materials.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eO-flute geometry\u003c\/strong\u003e is especially well suited for cutting \u003cstrong\u003eacrylic, plastic, PVC, and other softer materials\u003c\/strong\u003e. It may also be used in \u003cstrong\u003ealuminum and suitable non-ferrous materials\u003c\/strong\u003e when proper feeds, speeds, chip clearing, and workholding are used.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eup-cut design\u003c\/strong\u003e helps evacuate chips efficiently and can improve \u003cstrong\u003ebottom-edge cut quality\u003c\/strong\u003e in many routing applications. Because up-cut tools pull chips upward, the top edge may require proper hold-down, masking, or finishing depending on the material.\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic and plastic machining\u003c\/li\u003e\n  \u003cli\u003ePVC cutting\u003c\/li\u003e\n  \u003cli\u003eSignmaking and plastic fabrication\u003c\/li\u003e\n  \u003cli\u003eAluminum routing and milling when properly set up\u003c\/li\u003e\n  \u003cli\u003eSuitable non-ferrous material cutting\u003c\/li\u003e\n  \u003cli\u003eProfiling and contouring\u003c\/li\u003e\n  \u003cli\u003eSlotting and detail work\u003c\/li\u003e\n  \u003cli\u003eCNC applications requiring efficient chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle O-flute design supports efficient chip evacuation in plastics and softer materials\u003c\/li\u003e\n  \u003cli\u003eUp-cut geometry helps pull chips up and away from the cut\u003c\/li\u003e\n  \u003cli\u003eCan improve bottom-edge cut quality in many routing applications\u003c\/li\u003e\n  \u003cli\u003e8mm LOC provides useful cutting reach for small profiles, slots, and detail work\u003c\/li\u003e\n  \u003cli\u003eSquare end geometry is suitable for slotting, profiling, trimming, and general routing work\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction provides rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eStandard 1\/8\" shank fits many compact CNC routers and precision collet setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse;\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eTool Type\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide O-Flute End Mill\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCondition\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNew\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCutting Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e0.0787\" \/ 2.00mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eLength of Cut \/ Flute Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e8mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eOverall Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1.50\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eShank Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFlutes\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eGeometry\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eO-Flute\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eEnd Style\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSquare End\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCut Direction\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eUp Cut\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eMaterial\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFinish \/ Coating\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eBright \/ Uncoated\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eNeed help choosing starting settings?\u003c\/strong\u003e\u003cbr\u003e\n  See our \u003ca href=\"https:\/\/drillbitsunlimited.com\/pages\/carbide-end-mill-feed-speed-calculator\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003ecarbide end mill feed and speed calculator →\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eLooking for more O-flute carbide end mills?\u003c\/strong\u003e\u003cbr\u003e\n  Shop O-flute carbide end mills here: \u003ca href=\"https:\/\/drillbitsunlimited.com\/collections\/o-flute-end-mills\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003eO-flute end mills →\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Drill Bits Unlimted","offers":[{"title":"Default Title","offer_id":46781360603365,"sku":"MO-170","price":7.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/3082\/2885\/files\/m119--single-o-flute-carbide-end-mill-2-00mm-hero.jpg?v=1774982169"},{"product_id":"0-0787-2-00mm-x-12mm-472-flute-length-single-o-flute-carbide-end-mill-tin-coated-m126","title":"0.0787\" (2.00mm) x 12mm LOC TiN Coated Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank | MO-140","description":"\u003cp\u003e\u003cstrong\u003e0.0787\" (2.00mm) x 12mm LOC TiN Coated Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003esingle O-flute carbide end mill\u003c\/strong\u003e features a \u003cstrong\u003e0.0787\" (2.00mm) cutting diameter\u003c\/strong\u003e, \u003cstrong\u003e12mm (.472\") length of cut\u003c\/strong\u003e, \u003cstrong\u003e1.50\" overall length\u003c\/strong\u003e, and a standard \u003cstrong\u003e1\/8\" shank\u003c\/strong\u003e. The \u003cstrong\u003etitanium nitride (TiN) coating\u003c\/strong\u003e provides added surface hardness and wear resistance compared with uncoated carbide.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eO-flute geometry\u003c\/strong\u003e is especially well suited for cutting \u003cstrong\u003eacrylic, plastic, PVC, and other softer materials\u003c\/strong\u003e. It may also be used in \u003cstrong\u003ealuminum and suitable non-ferrous materials\u003c\/strong\u003e when proper feeds, speeds, chip clearing, and workholding are used.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eup-cut design\u003c\/strong\u003e helps evacuate chips efficiently and can improve \u003cstrong\u003ebottom-edge cut quality\u003c\/strong\u003e in many routing applications. Because up-cut tools pull chips upward, the top edge may require proper hold-down, masking, or finishing depending on the material.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSetup note:\u003c\/strong\u003e This tool has a \u003cstrong\u003e12mm LOC\u003c\/strong\u003e on a \u003cstrong\u003e2.00mm cutting diameter\u003c\/strong\u003e. Use appropriate pass depth, good chip clearing, and secure workholding to reduce deflection, chatter, or tool breakage.\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic and plastic machining\u003c\/li\u003e\n  \u003cli\u003ePVC cutting\u003c\/li\u003e\n  \u003cli\u003eSignmaking and plastic fabrication\u003c\/li\u003e\n  \u003cli\u003eAluminum routing and milling when properly set up\u003c\/li\u003e\n  \u003cli\u003eSuitable non-ferrous material cutting\u003c\/li\u003e\n  \u003cli\u003eProfiling and contouring\u003c\/li\u003e\n  \u003cli\u003eSlotting and detail work\u003c\/li\u003e\n  \u003cli\u003eCNC applications requiring efficient chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle O-flute design supports efficient chip evacuation in plastics and softer materials\u003c\/li\u003e\n  \u003cli\u003eUp-cut geometry helps pull chips up and away from the cut\u003c\/li\u003e\n  \u003cli\u003eCan improve bottom-edge cut quality in many routing applications\u003c\/li\u003e\n  \u003cli\u003eTiN coating provides added wear resistance compared with uncoated carbide\u003c\/li\u003e\n  \u003cli\u003e12mm LOC provides added cutting reach for small profiles, slots, and detail work\u003c\/li\u003e\n  \u003cli\u003eSquare end geometry is suitable for slotting, profiling, trimming, and general routing work\u003c\/li\u003e\n  \u003cli\u003eStandard 1\/8\" shank fits many compact CNC routers and precision collet setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse;\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eTool Type\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide O-Flute End Mill\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCondition\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNew\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCutting Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e0.0787\" \/ 2.00mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eLength of Cut \/ Flute Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e12mm \/ .472\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eOverall Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1.50\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eShank Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFlutes\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eGeometry\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eO-Flute\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eEnd Style\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSquare End\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCut Direction\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eUp Cut\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eMaterial\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFinish \/ Coating\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eTitanium Nitride \/ TiN Coated\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eNeed help choosing starting settings?\u003c\/strong\u003e\u003cbr\u003e\n  See our \u003ca href=\"https:\/\/drillbitsunlimited.com\/pages\/carbide-end-mill-feed-speed-calculator\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003ecarbide end mill feed and speed calculator →\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eLooking for more O-flute carbide end mills?\u003c\/strong\u003e\u003cbr\u003e\n  Shop O-flute carbide end mills here: \u003ca href=\"https:\/\/drillbitsunlimited.com\/collections\/o-flute-end-mills\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003eO-flute end mills →\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Drill Bits Unlimted","offers":[{"title":"Default Title","offer_id":48534483173605,"sku":"MO-140","price":7.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/3082\/2885\/files\/m126-single-o-flute-carbide-end-mill-tin-coated-2-00mm-hero.jpg?v=1774883924"},{"product_id":"0-0787-2-00mm-x-22mm-866-flute-length-single-o-flute-carbide-end-mill-tin-coated-m127","title":"0.0787\" (2.00mm) x 22mm LOC TiN Coated Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank | MO-150","description":"\u003cp\u003e\u003cstrong\u003e0.0787\" (2.00mm) x 22mm LOC TiN Coated Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003esingle O-flute carbide end mill\u003c\/strong\u003e features a \u003cstrong\u003e0.0787\" (2.00mm) cutting diameter\u003c\/strong\u003e, \u003cstrong\u003e22mm (.866\") length of cut\u003c\/strong\u003e, \u003cstrong\u003e1.50\" overall length\u003c\/strong\u003e, and a standard \u003cstrong\u003e1\/8\" shank\u003c\/strong\u003e. The \u003cstrong\u003etitanium nitride (TiN) coating\u003c\/strong\u003e provides added surface hardness and wear resistance compared with uncoated carbide.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eO-flute geometry\u003c\/strong\u003e is especially well suited for cutting \u003cstrong\u003eacrylic, plastic, PVC, and other softer materials\u003c\/strong\u003e. It may also be used in \u003cstrong\u003ealuminum and suitable non-ferrous materials\u003c\/strong\u003e when proper feeds, speeds, chip clearing, and workholding are used.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eup-cut design\u003c\/strong\u003e helps evacuate chips efficiently and can improve \u003cstrong\u003ebottom-edge cut quality\u003c\/strong\u003e in many routing applications. Because up-cut tools pull chips upward, the top edge may require proper hold-down, masking, or finishing depending on the material.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant setup note:\u003c\/strong\u003e This tool has a long \u003cstrong\u003e22mm LOC\u003c\/strong\u003e relative to its \u003cstrong\u003e2.00mm cutting diameter\u003c\/strong\u003e. Use light passes, conservative feeds, good chip clearing, and secure workholding to reduce deflection, chatter, or tool breakage.\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic and plastic machining\u003c\/li\u003e\n  \u003cli\u003ePVC cutting\u003c\/li\u003e\n  \u003cli\u003eSignmaking and plastic fabrication\u003c\/li\u003e\n  \u003cli\u003eAluminum routing and milling when properly set up\u003c\/li\u003e\n  \u003cli\u003eSuitable non-ferrous material cutting\u003c\/li\u003e\n  \u003cli\u003eDetail routing and profiling\u003c\/li\u003e\n  \u003cli\u003eSlotting and contouring\u003c\/li\u003e\n  \u003cli\u003eCNC work requiring strong chip evacuation in softer materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle O-flute design supports efficient chip evacuation in plastics and softer materials\u003c\/li\u003e\n  \u003cli\u003eUp-cut geometry helps pull chips up and away from the cut\u003c\/li\u003e\n  \u003cli\u003eCan improve bottom-edge cut quality in many routing applications\u003c\/li\u003e\n  \u003cli\u003eTiN coating provides added wear resistance compared with uncoated carbide\u003c\/li\u003e\n  \u003cli\u003eLong 22mm LOC provides extra reach for deeper profiles, slots, and trimming work\u003c\/li\u003e\n  \u003cli\u003eSquare end geometry is suitable for slotting, profiling, trimming, and general routing work\u003c\/li\u003e\n  \u003cli\u003eStandard 1\/8\" shank fits many compact CNC routers and precision collet setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse;\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eTool Type\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide O-Flute End Mill\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCondition\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNew\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCutting Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e0.0787\" \/ 2.00mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eLength of Cut \/ Flute Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e22mm \/ .866\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eOverall Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1.50\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eShank Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFlutes\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eGeometry\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eO-Flute\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eEnd Style\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSquare End\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCut Direction\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eUp Cut\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eMaterial\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFinish \/ Coating\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eTitanium Nitride \/ TiN Coated\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eNeed help choosing starting settings?\u003c\/strong\u003e\u003cbr\u003e\n  See our \u003ca href=\"https:\/\/drillbitsunlimited.com\/pages\/carbide-end-mill-feed-speed-calculator\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003ecarbide end mill feed and speed calculator →\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eLooking for more O-flute carbide end mills?\u003c\/strong\u003e\u003cbr\u003e\n  Shop O-flute carbide end mills here: \u003ca href=\"https:\/\/drillbitsunlimited.com\/collections\/o-flute-end-mills\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003eO-flute end mills →\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Drill Bits Unlimted","offers":[{"title":"Default Title","offer_id":48623949447397,"sku":"MO-150","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/3082\/2885\/files\/m127-single-o-flute-carbide-end-mill-tin-coated-2-00mm-hero.jpg?v=1774881718"},{"product_id":"0472-120mm-x-6mm-loc-single-o-flute-carbide-end-mill-titanium-coated-m128","title":"0.0472\" (1.2mm) x 6mm LOC TiN Coated Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank | MO-110","description":"\u003cp\u003e\nThis \u003cstrong\u003e.0472\" (1.20mm) single O-flute carbide end mill\u003c\/strong\u003e features a \u003cstrong\u003etitanium coated finish\u003c\/strong\u003e and is designed for clean, efficient cutting in materials that benefit from fast chip evacuation and reduced recutting.\n\u003c\/p\u003e\n\n\u003cp\u003e\nThe \u003cstrong\u003eO-flute geometry\u003c\/strong\u003e makes this tool especially well suited for \u003cstrong\u003ealuminum, acrylic, plastic, and other soft non-ferrous materials\u003c\/strong\u003e. Its flute form helps evacuate chips efficiently while supporting smoother edge quality in lighter-duty precision milling applications.\n\u003c\/p\u003e\n\n\u003cp\u003e\nWith a \u003cstrong\u003e6mm length of cut\u003c\/strong\u003e, \u003cstrong\u003e1.50\" overall length\u003c\/strong\u003e, and \u003cstrong\u003e1\/8\" shank\u003c\/strong\u003e, this tool is a practical choice for detailed CNC work, slotting, profiling, and contouring where a small diameter cutter is needed.\n\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eAluminum milling\u003c\/li\u003e\n\u003cli\u003eAcrylic and plastic cutting\u003c\/li\u003e\n\u003cli\u003eProfiling and contouring\u003c\/li\u003e\n\u003cli\u003eSlotting and edge finishing\u003c\/li\u003e\n\u003cli\u003eLight-duty CNC machining in soft materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eSingle O-flute geometry helps improve chip evacuation\u003c\/li\u003e\n\u003cli\u003eTitanium coating supports wear resistance\u003c\/li\u003e\n\u003cli\u003eGood choice for aluminum and plastics\u003c\/li\u003e\n\u003cli\u003eSmall diameter for fine-detail machining\u003c\/li\u003e\n\u003cli\u003e1\/8\" shank fits common precision toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003ctable class=\"product-specifications__table table table-striped\"\u003e\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTool Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSingle O-Flute Carbide End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e.0472\" (1.20mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength of Cut (LOC)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOverall Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.50\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShank Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFlute Count\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGeometry\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Flute\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTitanium Coated\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCarbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCut Direction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum, Acrylic, Plastic, Soft Non-Ferrous Materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eM128\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003e\u003ca href=\"\/pages\/carbide-end-mill-feed-speed-calculator\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline-block; font-size:16px !important; color:#0a66c2 !important; font-weight:600; text-decoration:underline;\"\u003e👉 View End Mill Feed \u0026amp; Speed Calculator\u003c\/a\u003e\u003c\/p\u003e","brand":"Drill Bits Unlimted","offers":[{"title":"Default Title","offer_id":48623949742309,"sku":"MO-110","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/3082\/2885\/files\/m128-single-o-flute-carbide-end-mill-titanium-coated-hero.jpg?v=1774880824"},{"product_id":"100mm-0394-titanium-nitride-coated-o-flute-carbide-end-mill","title":"0.0394\" (1.00mm) x 4mm LOC TiN Coated Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank | MO-100","description":"\u003cp\u003e\u003cstrong\u003e1.00mm (0.0394\") x 4mm LOC TiN Coated Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003e1.00mm (0.0394\") single O-flute carbide end mill\u003c\/strong\u003e features a \u003cstrong\u003e4mm length of cut\u003c\/strong\u003e, \u003cstrong\u003e1.50\" overall length\u003c\/strong\u003e, \u003cstrong\u003e1\/8\" shank\u003c\/strong\u003e, and a \u003cstrong\u003etitanium nitride coated finish\u003c\/strong\u003e. It is designed for fine-detail CNC routing, milling, shallow slotting, profiling, and contouring in plastics and suitable non-ferrous materials.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003esingle O-flute geometry\u003c\/strong\u003e is especially well suited for cutting \u003cstrong\u003eacrylic, plastic, PVC, and other softer materials\u003c\/strong\u003e. It may also be used in \u003cstrong\u003ealuminum and suitable non-ferrous metals\u003c\/strong\u003e when proper feeds, speeds, chip clearing, and workholding are used.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eup-cut design\u003c\/strong\u003e helps evacuate chips efficiently and can improve \u003cstrong\u003ebottom-edge cut quality\u003c\/strong\u003e in many routing applications. Because up-cut tools pull chips upward, the top edge may require proper hold-down, masking, or finishing depending on the material.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003etitanium nitride coating\u003c\/strong\u003e provides added surface hardness and wear resistance compared with uncoated carbide, while the small 1.00mm cutting diameter makes this tool useful for precision small-part machining and fine CNC detail work.\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic and plastic machining\u003c\/li\u003e\n  \u003cli\u003ePVC cutting\u003c\/li\u003e\n  \u003cli\u003eFine-detail CNC cutting\u003c\/li\u003e\n  \u003cli\u003eShallow slotting and profiling\u003c\/li\u003e\n  \u003cli\u003eSmall-part machining\u003c\/li\u003e\n  \u003cli\u003eAluminum routing and milling when properly set up\u003c\/li\u003e\n  \u003cli\u003eSuitable non-ferrous material cutting\u003c\/li\u003e\n  \u003cli\u003eCNC applications requiring efficient chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle O-flute design supports efficient chip evacuation in plastics and softer materials\u003c\/li\u003e\n  \u003cli\u003eUp-cut geometry helps pull chips up and away from the cut\u003c\/li\u003e\n  \u003cli\u003eCan improve bottom-edge cut quality in many routing applications\u003c\/li\u003e\n  \u003cli\u003eTitanium nitride coating provides added wear resistance compared with uncoated carbide\u003c\/li\u003e\n  \u003cli\u003eSmall 1.00mm diameter is useful for fine-detail machining\u003c\/li\u003e\n  \u003cli\u003eSquare end geometry is suitable for shallow slotting, profiling, and contouring\u003c\/li\u003e\n  \u003cli\u003eStandard 1\/8\" shank fits many compact CNC routers and precision collet setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse;\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eTool Type\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide O-Flute End Mill\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCondition\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNew\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCutting Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1.00mm \/ 0.0394\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eLength of Cut \/ Flute Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e4.00mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eOverall Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1.50\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eShank Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e0.1250\" \/ 1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFlutes\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eGeometry\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eO-Flute\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eEnd Style\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSquare End\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCut Direction\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eUp Cut\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eMaterial\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFinish \/ Coating\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eTitanium Nitride \/ TiN Coated\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eNeed help choosing starting settings?\u003c\/strong\u003e\u003cbr\u003e\n  See our \u003ca href=\"https:\/\/drillbitsunlimited.com\/pages\/carbide-end-mill-feed-speed-calculator\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003ecarbide end mill feed and speed calculator →\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eLooking for more O-flute carbide end mills?\u003c\/strong\u003e\u003cbr\u003e\n  Shop O-flute carbide end mills here: \u003ca href=\"https:\/\/drillbitsunlimited.com\/collections\/o-flute-end-mills\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003eO-flute end mills →\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Drill Bits Unlimted","offers":[{"title":"Default Title","offer_id":48623958261989,"sku":"MO-100","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/3082\/2885\/files\/100mm-0394-tin-coated-o-flute-carbide-end-mill-hero.jpg?v=1774880052"},{"product_id":"0-236-6mm-x-25mm-loc-single-o-flute-carbide-end-mill-up-cut-50mm-oal-6mm-shank-mo-235","title":"0.2360\" (6.00mm) x 25mm LOC Single O-Flute Carbide End Mill, Up Cut, 6mm Shank | MO-235","description":"\u003cp\u003e\u003cstrong\u003e6mm x 25mm LOC Single O-Flute Carbide End Mill, Up Cut, 6mm Shank\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003esingle O-flute carbide end mill\u003c\/strong\u003e features a \u003cstrong\u003e6mm cutting diameter\u003c\/strong\u003e, \u003cstrong\u003e25mm length of cut\u003c\/strong\u003e, \u003cstrong\u003esingle O-flute geometry\u003c\/strong\u003e, \u003cstrong\u003e50mm overall length\u003c\/strong\u003e, and a \u003cstrong\u003e6mm shank\u003c\/strong\u003e. Its bright, uncoated solid carbide construction makes it a practical choice for CNC routing, milling, profiling, slotting, and trimming in plastics and suitable non-ferrous materials.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eO-flute geometry\u003c\/strong\u003e is especially well suited for cutting \u003cstrong\u003eacrylic, plastic, PVC, and other softer materials\u003c\/strong\u003e. It may also be used in \u003cstrong\u003ealuminum and suitable non-ferrous metals\u003c\/strong\u003e when proper feeds, speeds, chip clearing, and workholding are used.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eup-cut design\u003c\/strong\u003e helps evacuate chips efficiently and can improve \u003cstrong\u003ebottom-edge cut quality\u003c\/strong\u003e in many routing applications. Because up-cut tools pull chips upward, the top edge may require proper hold-down, masking, or finishing depending on the material.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant setup note:\u003c\/strong\u003e This tool has a long \u003cstrong\u003e25mm LOC\u003c\/strong\u003e. Use appropriate pass depth, conservative feeds, good chip clearing, and secure workholding to reduce deflection, chatter, or tool breakage.\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic and plastic machining\u003c\/li\u003e\n  \u003cli\u003ePVC cutting\u003c\/li\u003e\n  \u003cli\u003eSignmaking and plastic fabrication\u003c\/li\u003e\n  \u003cli\u003eAluminum routing and milling when properly set up\u003c\/li\u003e\n  \u003cli\u003eSuitable non-ferrous material cutting\u003c\/li\u003e\n  \u003cli\u003eProfiling and contouring\u003c\/li\u003e\n  \u003cli\u003eSlotting and edge trimming\u003c\/li\u003e\n  \u003cli\u003eCNC applications requiring efficient chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle O-flute design supports efficient chip evacuation in plastics and softer materials\u003c\/li\u003e\n  \u003cli\u003eUp-cut geometry helps pull chips up and away from the cut\u003c\/li\u003e\n  \u003cli\u003eCan improve bottom-edge cut quality in many routing applications\u003c\/li\u003e\n  \u003cli\u003eLong 25mm LOC provides added cutting reach for deeper profiles and slots\u003c\/li\u003e\n  \u003cli\u003eSquare end geometry is suitable for slotting, profiling, trimming, and general routing work\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction provides rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003e6mm shank fits compatible metric collets and toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse;\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eTool Type\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide End Mill\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCondition\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNew\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCutting Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e6mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eLength of Cut \/ Flute Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e25mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eOverall Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e50mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eShank Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e6mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFlutes\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eGeometry\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eO-Flute\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eEnd Style\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSquare End\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCut Direction\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eUp Cut\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eMaterial\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFinish \/ Coating\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eBright \/ Uncoated\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eNeed help choosing starting settings?\u003c\/strong\u003e\u003cbr\u003e\n  See our \u003ca href=\"https:\/\/drillbitsunlimited.com\/pages\/carbide-end-mill-feed-speed-calculator\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003ecarbide end mill feed and speed calculator →\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eLooking for more O-flute carbide end mills?\u003c\/strong\u003e\u003cbr\u003e\n  Shop O-flute carbide end mills here: \u003ca href=\"https:\/\/drillbitsunlimited.com\/collections\/o-flute-end-mills\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003eO-flute end mills →\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Drill Bits Unlimted","offers":[{"title":"Default Title","offer_id":49088916095205,"sku":null,"price":11.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/3082\/2885\/files\/MO-235GALLERY.jpg?v=1779192418"},{"product_id":"0-0984-2-50mm-x-15mm-flute-length-single-o-flute-carbide-end-mill-up-cut-1-8-shank-mo-175","title":"0.0984\" (2.5mm) x 15mm LOC Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank | MO-175","description":"\u003cp\u003e\u003cstrong\u003e0.0984\" (2.50mm) x 15mm LOC Single O-Flute Carbide End Mill, Up Cut, 1\/8\" Shank – MO-175\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003esingle O-flute carbide end mill\u003c\/strong\u003e features a \u003cstrong\u003e0.0984\" (2.50mm) cutting diameter\u003c\/strong\u003e, \u003cstrong\u003e15mm length of cut\u003c\/strong\u003e, \u003cstrong\u003esingle O-flute geometry\u003c\/strong\u003e, \u003cstrong\u003e1.50\" overall length\u003c\/strong\u003e, and a standard \u003cstrong\u003e1\/8\" shank\u003c\/strong\u003e. It is designed for CNC routing, milling, profiling, slotting, and trimming in plastics and suitable non-ferrous materials.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eO-flute geometry\u003c\/strong\u003e is especially well suited for cutting \u003cstrong\u003eacrylic, plastic, PVC, and other softer materials\u003c\/strong\u003e. It may also be used in \u003cstrong\u003ealuminum and suitable non-ferrous metals\u003c\/strong\u003e when proper feeds, speeds, chip clearing, and workholding are used.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eup-cut design\u003c\/strong\u003e helps evacuate chips efficiently and can improve \u003cstrong\u003ebottom-edge cut quality\u003c\/strong\u003e in many routing applications. Because up-cut tools pull chips upward, the top edge may require proper hold-down, masking, or finishing depending on the material.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant setup note:\u003c\/strong\u003e This tool has a relatively long \u003cstrong\u003e15mm LOC\u003c\/strong\u003e for its \u003cstrong\u003e2.50mm cutting diameter\u003c\/strong\u003e. Use light passes, conservative feeds, good chip clearing, and secure workholding to reduce deflection, chatter, or tool breakage.\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic and plastic machining\u003c\/li\u003e\n  \u003cli\u003ePVC cutting\u003c\/li\u003e\n  \u003cli\u003eSignmaking and plastic fabrication\u003c\/li\u003e\n  \u003cli\u003eAluminum routing and milling when properly set up\u003c\/li\u003e\n  \u003cli\u003eSuitable non-ferrous material cutting\u003c\/li\u003e\n  \u003cli\u003eProfiling and contouring\u003c\/li\u003e\n  \u003cli\u003eSlotting and edge trimming\u003c\/li\u003e\n  \u003cli\u003eCNC applications requiring efficient chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle O-flute design supports efficient chip evacuation in plastics and softer materials\u003c\/li\u003e\n  \u003cli\u003eUp-cut geometry helps pull chips up and away from the cut\u003c\/li\u003e\n  \u003cli\u003eCan improve bottom-edge cut quality in many routing applications\u003c\/li\u003e\n  \u003cli\u003e15mm LOC provides added cutting reach for deeper profiles and slots\u003c\/li\u003e\n  \u003cli\u003eSquare end geometry is suitable for slotting, profiling, trimming, and general routing work\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction provides rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eStandard 1\/8\" shank fits many compact CNC routers and precision collet setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse;\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eSKU\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eMO-175\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eTool Type\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide End Mill\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCondition\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eNew\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCutting Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e0.0984\" \/ 2.50mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eLength of Cut \/ Flute Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e15mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFlutes\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eGeometry\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eO-Flute\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eEnd Style\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSquare End\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eCut Direction\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eUp Cut\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eOverall Length\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1.50\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eShank Diameter\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003e1\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eMaterial\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eSolid Carbide\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align:left; border:1px solid #d8d8d8;\"\u003eFinish \/ Coating\u003c\/th\u003e\n      \u003ctd style=\"border:1px solid #d8d8d8;\"\u003eBright \/ Uncoated\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eNeed help choosing starting settings?\u003c\/strong\u003e\u003cbr\u003e\n  See our \u003ca href=\"https:\/\/drillbitsunlimited.com\/pages\/carbide-end-mill-feed-speed-calculator\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003ecarbide end mill feed and speed calculator →\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#f5f5f5; border:1px solid #d8d8d8; padding:14px; margin-top:18px; border-radius:6px;\"\u003e\n  \u003cstrong\u003eLooking for more O-flute carbide end mills?\u003c\/strong\u003e\u003cbr\u003e\n  Shop O-flute carbide end mills here: \u003ca href=\"https:\/\/drillbitsunlimited.com\/collections\/o-flute-end-mills\" style=\"color:#0066cc !important; font-weight:bold; text-decoration:underline;\"\u003eO-flute end mills →\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Drill Bits Unlimted","offers":[{"title":"Default Title","offer_id":49098666672357,"sku":"MO-175","price":7.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/3082\/2885\/files\/mo-175-gal.jpg?v=1779300148"}],"url":"https:\/\/drillbitsunlimited.com\/collections\/o-flute-end-mills.oembed?page=2","provider":"Drill Bits Unlimited","version":"1.0","type":"link"}