Drill Bits Unlimited
0.0630" (1.60mm) x .315" LOC 3-Flute Straight-Flute Carbide End Mill, Non-Center-Cutting | M3-100
0.0630" (1.60mm) x .315" LOC 3-Flute Straight-Flute Carbide End Mill, Non-Center-Cutting | M3-100
Buy more and Save!
| Minimum Qty | Discount |
|---|---|
| 10 + | 5% off |
| 25 + | 7% off |
| 50 + | 10% off |
| 100 + | 15% off |
Couldn't load pickup availability
This Kyocera Series 1735 solid carbide end mill has a 0.0630" (1.60mm) cutting diameter, .315" (8mm) length of cut (LOC), three straight flutes (0° helix), a square-end profile, and a standard 1/8" (3.175mm) shank. It is intended for precision CNC side routing, profiling, and edge milling in suitable printed circuit board materials, gold-tab connectors, plastics, laminates, and soft metals.
Important — non-center-cutting tip: This end mill is not designed for direct vertical plunging into solid material. Its square-end profile does not mean that it is center-cutting. Enter the cut from an open edge or a prepared opening, using an appropriate toolpath.
Why straight flutes? The 0° helix geometry does not produce the upward or downward pulling action of spiral-flute cutters. It is well suited to controlled side cutting and clean-edge routing in appropriate materials. Straight flutes do not actively lift chips out of the cut like an up-cut spiral, so use suitable feeds, speeds, workholding, and chip removal.
Specifications
| Cutting diameter | 0.0630" (1.60mm; approximately 1/16") |
|---|---|
| Length of cut (LOC) | .315" (8mm) |
| Flutes | 3 straight flutes |
| Helix angle | 0° (no up-cut or down-cut spiral) |
| End style | Square end; non-center-cutting |
| Cutting hand | Right-hand cutting |
| Shank diameter | 1/8" (3.175mm) |
| Overall length | 1.50" (38.1mm) |
| Material | Solid carbide |
| Manufacturer | Kyocera |
| Kyocera series | 1735 |
| Manufacturer part number | 1735.0630.315 |
| DBU SKU | M3-100 |
| Condition | New |
Former DBU SKU: M180
Returns
Returns
Returns are accepted within 30 days of delivery for unused items in resalable condition. Original shipping charges are non-refundable unless the return is due to our error. Late, bulk, used, clearance, or special-order returns may be limited or subject to approval. See our Refund Policy for full details.
Share
