Collection: All Routers

Use the filters below to narrow results by diameter, flute geometry, plunge tip type, and cut direction to find the exact tool you need.

Fish Tail tips are preferred for delicate entry into brittle materials, while

Drill Point tips are designed for repeated plunging and added tip strength.

New to router bits? View our Router Bits Guide →

Comparing Diamond Flute vs Chip Breaker? Read the comparison guide →

Looking for value-priced tooling? Browse our Value Tool Deals collection for lightly used routers, factory resharpened tools, and surplus carbide tooling offered at reduced prices.

.0197"–.1250" / 0.50–3.175mm Chip Breaker PCB Router Bit Set – Fish Tail – 1/8" Shank – 10 Pc CBR-V1

.0197"–.1250" / 0.50–3.175mm Chip Breaker PCB Router Bit Set – Fish Tail – 1/8" Shank – 10 Pc CBR-V1

Regular price $39.95 USD

Regular price ~~$32.10 USD~~ Sale price $39.95 USD
.0315"–.0945" / 0.80–2.40mm Carbide Router & 2-Flute End Mill Variety Set – 50 Pc – RX1

.0315"–.0945" / 0.80–2.40mm Carbide Router & 2-Flute End Mill Variety Set – 50 Pc – RX1

Regular price $59.95 USD

Regular price Sale price $59.95 USD
.0315"–.1250" / 1/32"–1/8" / 0.80–3.175mm Diamond Flute Router Bit Set – Fish Tail – 10 Pc – RBS-LU

Sold out

.0315"–.1250" / 1/32"–1/8" / 0.80–3.175mm Diamond Flute Router Bit Set – Fish Tail – 10 Pc – RBS-LU

Regular price $13.41 USD

Regular price Sale price $13.41 USD

Sold out
.0315"–.1250" / 1/32"–1/8" Diamond Flute PCB Router Bit Set – Fish Tail – 10 Pc – DCF-V1

.0315"–.1250" / 1/32"–1/8" Diamond Flute PCB Router Bit Set – Fish Tail – 10 Pc – DCF-V1

Regular price $34.95 USD

Regular price ~~$34.90 USD~~ Sale price $34.95 USD
.0500"–.1250" / 1.25–3.175mm Kyocera Diamond Flute PCB Router Bit Set – Fish Tail – 10 Pc – R1-N

.0500"–.1250" / 1.25–3.175mm Kyocera Diamond Flute PCB Router Bit Set – Fish Tail – 10 Pc – R1-N

Regular price $34.95 USD

Regular price Sale price $34.95 USD
0.0197" (0.50mm) Kyocera Chip Breaker PCB Router, 3mm LOC, Drill Point, Up-Cut, 1/8" Shank | R148

0.0197" (0.50mm) Kyocera Chip Breaker PCB Router, 3mm LOC, Drill Point, Up-Cut, 1/8" Shank | R148

Regular price $4.99 USD

Regular price Sale price $4.99 USD
0.0197" (0.50mm) x .079" LOC Kyocera Diamond Flute PCB Router, Fish Tail, 1/8" Shank | R103

0.0197" (0.50mm) x .079" LOC Kyocera Diamond Flute PCB Router, Fish Tail, 1/8" Shank | R103

Regular price $4.49 USD

Regular price Sale price $4.49 USD
0.0197" (0.50mm) x .160" LOC TiN-Coated Diamond Flute PCB Router, Fish Tail, 1/8" Shank | RS-100

0.0197" (0.50mm) x .160" LOC TiN-Coated Diamond Flute PCB Router, Fish Tail, 1/8" Shank | RS-100

Regular price $5.95 USD

Regular price Sale price $5.95 USD
0.0236" (0.60mm) x .118" LOC Kyocera Diamond Flute PCB Router, Fish Tail, 1/8" Shank | R104

0.0236" (0.60mm) x .118" LOC Kyocera Diamond Flute PCB Router, Fish Tail, 1/8" Shank | R104

Regular price $4.95 USD

Regular price Sale price $4.95 USD
0.0312" (1/32") x .158" LOC Diamond Flute PCB Router, Fish Tail, 1/8" Shank | R106A

0.0312" (1/32") x .158" LOC Diamond Flute PCB Router, Fish Tail, 1/8" Shank | R106A

Regular price $4.95 USD

Regular price Sale price $4.95 USD
0.0312" (1/32") x .250" LOC TiN-Coated Diamond Flute PCB Router, Down-Cut, Fish Tail, 1/8" Shank | RS-110

0.0312" (1/32") x .250" LOC TiN-Coated Diamond Flute PCB Router, Down-Cut, Fish Tail, 1/8" Shank | RS-110

Regular price $6.99 USD

Regular price Sale price $6.99 USD
0.0315" (0.80mm / 1/32") Kyocera Chip Breaker PCB Router, .197" LOC, Drill Point, Up-Cut | R149D

0.0315" (0.80mm / 1/32") Kyocera Chip Breaker PCB Router, .197" LOC, Drill Point, Up-Cut | R149D

Regular price $4.99 USD

Regular price Sale price $4.99 USD
0.0315" (0.80mm / 1/32") Kyocera Chip Breaker PCB Router, .197" LOC, Fish Tail, Up-Cut | R149

0.0315" (0.80mm / 1/32") Kyocera Chip Breaker PCB Router, .197" LOC, Fish Tail, Up-Cut | R149

Regular price $4.99 USD

Regular price Sale price $4.99 USD
0.0315" (0.80mm) x .197" LOC Kyocera Diamond Flute PCB Router, Fish Tail, 1/8" Shank | R105

0.0315" (0.80mm) x .197" LOC Kyocera Diamond Flute PCB Router, Fish Tail, 1/8" Shank | R105

Regular price $5.49 USD

Regular price Sale price $5.49 USD
0.0315" (1/32") x .200" LOC Diamond Flute PCB Router, Down Cut, Fish Tail Tip, 1/8" Shank | RS-120

0.0315" (1/32") x .200" LOC Diamond Flute PCB Router, Down Cut, Fish Tail Tip, 1/8" Shank | RS-120

Regular price $5.99 USD

Regular price Sale price $5.99 USD
0.0315" (1/32") x .240" LOC Diamond Flute PCB Router, Drill Point Tip, 1/8" Shank | R107

0.0315" (1/32") x .240" LOC Diamond Flute PCB Router, Drill Point Tip, 1/8" Shank | R107

Regular price $4.49 USD

Regular price Sale price $4.49 USD

Your cart is empty

Your cart

Estimated total

Collection: All Routers

.0197"–.1250" / 0.50–3.175mm Chip Breaker PCB Router Bit Set – Fish Tail – 1/8" Shank – 10 Pc CBR-V1

.0197"–.1250" / 0.50–3.175mm Chip Breaker PCB Router Bit Set – Fish Tail – 1/8" Shank – 10 Pc CBR-V1

.0315"–.0945" / 0.80–2.40mm Carbide Router & 2-Flute End Mill Variety Set – 50 Pc – RX1

.0315"–.0945" / 0.80–2.40mm Carbide Router & 2-Flute End Mill Variety Set – 50 Pc – RX1

.0315"–.1250" / 1/32"–1/8" / 0.80–3.175mm Diamond Flute Router Bit Set – Fish Tail – 10 Pc – RBS-LU

.0315"–.1250" / 1/32"–1/8" / 0.80–3.175mm Diamond Flute Router Bit Set – Fish Tail – 10 Pc – RBS-LU

.0315"–.1250" / 1/32"–1/8" Diamond Flute PCB Router Bit Set – Fish Tail – 10 Pc – DCF-V1

.0315"–.1250" / 1/32"–1/8" Diamond Flute PCB Router Bit Set – Fish Tail – 10 Pc – DCF-V1

.0500"–.1250" / 1.25–3.175mm Kyocera Diamond Flute PCB Router Bit Set – Fish Tail – 10 Pc – R1-N

.0500"–.1250" / 1.25–3.175mm Kyocera Diamond Flute PCB Router Bit Set – Fish Tail – 10 Pc – R1-N

0.0197" (0.50mm) Kyocera Chip Breaker PCB Router, 3mm LOC, Drill Point, Up-Cut, 1/8" Shank | R148

0.0197" (0.50mm) Kyocera Chip Breaker PCB Router, 3mm LOC, Drill Point, Up-Cut, 1/8" Shank | R148

0.0197" (0.50mm) x .079" LOC Kyocera Diamond Flute PCB Router, Fish Tail, 1/8" Shank | R103

0.0197" (0.50mm) x .079" LOC Kyocera Diamond Flute PCB Router, Fish Tail, 1/8" Shank | R103

0.0197" (0.50mm) x .160" LOC TiN-Coated Diamond Flute PCB Router, Fish Tail, 1/8" Shank | RS-100

0.0197" (0.50mm) x .160" LOC TiN-Coated Diamond Flute PCB Router, Fish Tail, 1/8" Shank | RS-100

0.0236" (0.60mm) x .118" LOC Kyocera Diamond Flute PCB Router, Fish Tail, 1/8" Shank | R104

0.0236" (0.60mm) x .118" LOC Kyocera Diamond Flute PCB Router, Fish Tail, 1/8" Shank | R104

0.0312" (1/32") x .158" LOC Diamond Flute PCB Router, Fish Tail, 1/8" Shank | R106A

0.0312" (1/32") x .158" LOC Diamond Flute PCB Router, Fish Tail, 1/8" Shank | R106A

0.0312" (1/32") x .250" LOC TiN-Coated Diamond Flute PCB Router, Down-Cut, Fish Tail, 1/8" Shank | RS-110

0.0312" (1/32") x .250" LOC TiN-Coated Diamond Flute PCB Router, Down-Cut, Fish Tail, 1/8" Shank | RS-110

0.0315" (0.80mm / 1/32") Kyocera Chip Breaker PCB Router, .197" LOC, Drill Point, Up-Cut | R149D

0.0315" (0.80mm / 1/32") Kyocera Chip Breaker PCB Router, .197" LOC, Drill Point, Up-Cut | R149D

0.0315" (0.80mm / 1/32") Kyocera Chip Breaker PCB Router, .197" LOC, Fish Tail, Up-Cut | R149

0.0315" (0.80mm / 1/32") Kyocera Chip Breaker PCB Router, .197" LOC, Fish Tail, Up-Cut | R149

0.0315" (0.80mm) x .197" LOC Kyocera Diamond Flute PCB Router, Fish Tail, 1/8" Shank | R105

0.0315" (0.80mm) x .197" LOC Kyocera Diamond Flute PCB Router, Fish Tail, 1/8" Shank | R105

0.0315" (1/32") x .200" LOC Diamond Flute PCB Router, Down Cut, Fish Tail Tip, 1/8" Shank | RS-120

0.0315" (1/32") x .200" LOC Diamond Flute PCB Router, Down Cut, Fish Tail Tip, 1/8" Shank | RS-120

0.0315" (1/32") x .240" LOC Diamond Flute PCB Router, Drill Point Tip, 1/8" Shank | R107

0.0315" (1/32") x .240" LOC Diamond Flute PCB Router, Drill Point Tip, 1/8" Shank | R107

Country/region

Collection: All Routers

Filter and sort

Filter